(Only applies to Navigator V5.0) With some PDA-models there sometimes is a problem with the map installation procedure. You can fix it with these instructions :
Open the map CD/DVD in Explorer and copy maps manually from data nsmaps (eg. DEU_07Q4.pda) into the b-navi directory on the SD-card.

This can be solved by adjusting Vista right management :
System control panel -> Administration -> Computer administration -> local users or administrator
-> Remove check on "Account is deactivated".
Then restart Navigator. Registration data now should be saved and kept saved.

If the com port of your receiver is not listed in the settings, there are 2 possibilities :
1.) Manually set it in Navigator.uni file, section "[GPS_HW]", entry "COMPort".
or
2.) Allow all possible COM ports to be listed by setting "SearchAll=1" in Navigator.uni file in section [GPS].

In the Navifriends-Forum (subscription neccessary) you will find the tool CSVToMuG, which enables you to import CSV and ASC POI data.

In our Support area there also is a POI import tool for use with Map&Guide Professional.

(only applies to devices which shipped before 12.03.2009) Open the SD-card with a PC and open the file "Navigator.uni" in the "Navigator"-directory with a text editor. Search for section "[MGG]" and change the value "SPM=0" to "SPM=1" (or SPM=3 with version 5.2 with Service Pack 1). If this line does not exist, add it.

In the "Navigator.uni"-file you can edit or add this section :
[System]
ActivatTimeZone=1
SummerTime=1
TimeZoneOffset=60

Install the Service Pack 1 for Truck/Fleet Navigator 5.2

At installation time "user accounts" have to be disabled. Start -> System control -> User accounts -> User account control activation/deactivation -> Remove switch. This setting can be set to origin state after installation has taken place.

In the "Navigator.uni"-file you can edit or add this section :
[Display]
TitelbarInfos=1
This way you will get 4 new icons in the upper right corner of the display showing :
- TMC signal quality
- GPS signal quality
- Volume lebvel
- battery capacity

Note : These information bars are only visible in the menu view but not during navigation.

At installation time "user accounts" have to be disabled.
Method 1:
Start --> First steps --> Settings for user accounts. Slider in lowest setting --> confirm with "OK" -> reboot PC
Method 2:
Start --> Run --> "msconfig" --> under tab "Tools" go to "UAC-settings" --> Start, then put slider on lowest position -> confirm -> reboot PC
Method 3:
Start --> Control center --> All elements -> user accounts --> "Change user account settings" , change slider position to lowest position --> reboot PC

Please check if switch "Hold" on rear side is turned off.

Add the program path to the extapp.uni-file.
Example:
MainmenuIconApplication=C:\Program Files (x86)\PTV Navigator 7\popup.exe
and
NavigationmenuIconApplication=C:\Program Files (x86)\PTV Navigator 7\popup.exe

In the V7.5 packets shipped until beginning of December 2012 some map files were named incorrectly, preventing TMC to work. This tool will fix the problem.